產品展示
聯系我們
聯系人：麥女士
手機：+86 15270269218
電話：
Q Q：3136378118
郵箱：stodcdcs@gmail.com
地址：江西省九江市瑞昌市東益路23號賽湖農商城401號
降低鏈條；其他斷路器必須能夠
承受與通道相關的熱應力和電動應力
故意延時的故障電流。選擇性斷路器，
通常為空氣式，必須用于各種級別，以確保足夠的
高短時耐受電流；
•短路電流引起的干擾持續時間
未受故障影響的區域內的電源電壓可能會導致電子和機電設備出現問題（電壓低于
電磁釋放值）；
•歧視級別的數量受到
網絡可以穩定運行。
以下示例顯示了獲得的時間判別的典型應用
通過不同設置不同保護裝置的跳閘時間。
電子版本：
E4S 4000 PR121-LSI In4000
E3N 2500 PR121-LSI In2500
T7H 1600 PR332-LI In1600
L（長延遲）
設置：0.93
曲線：36秒
設置：1
曲線：24秒
設置：1
曲線：18s
S（短延遲）
設置：10
曲線：0.5s
設置：10
曲線：0.2s
I（IST）
關
關
設置：10
cally lower down the chain; the other circuit-breakers have to be capable of withstanding the thermal and electro-dynamic stresses related to the passage of the fault current for the intentional time delay. Selective circuit-breakers, often air type, have to be used for the various levels to guarantee a sufficiently high short-time withstand current; • the duration of the disturbance induced by the short-circuit current on the power supply voltages in the zones unaffected by the fault can cause problems with electronic and electro-mechanical devices (voltage below the electromagnetic releasing value); • the number of discrimination levels is limited by the maximum time that the network can stand without loss of stability. The following example shows a typical application of time discrimination obtained by setting differently the tripping times of the different protection devices. Electronic release: E4S 4000 PR121-LSI In4000 E3N 2500 PR121-LSI In2500 T7H 1600 PR332-LI In1600 L (Long delay) Setting: 0.93 Curve: 36s Setting: 1 Curve: 24s Setting: 1 Curve: 18s S (Short delay) Setting: 10 Curve: 0.5s Setting: 10 Curve: 0.2s I (IST) Off Off Setting: 10
相關產品
