產品展示
聯系我們
聯系人：麥女士
手機：+86 15270269218
電話：
Q Q：3136378118
郵箱：stodcdcs@gmail.com
地址：江西省九江市瑞昌市東益路23號賽湖農商城401號
3532E
讀取輸入寄存器3x（Modbus功能代碼4）
與4x保持寄存器一樣，3x輸入寄存器用于讀取模擬
16位寄存器值。您還可以使用這些寄存器來存儲
浮點數據（第57頁）。與4x寄存器不同，3x寄存器是只讀的。
以下是讀取節點的Modbus地址30021至30030的示例命令
1在Modbus網絡上。
標簽說明
啟用=1模塊將在每次通過
命令列表。
IntAddress=1010將從設備讀取的數據放入模塊的地址
模塊內存的IntAddress 1010將復制到標簽中
MCM公司。數據。READDATA[10]。
計數=10從從設備讀取10個連續寄存器。
節點=1向網絡上的節點1發出Modbus命令。
Func=4發出Modbus功能代碼4以讀取輸入寄存器。
DevAddress=20功能代碼4 20的DevAddress將讀取地址30021
該命令與計數10一起讀取30021到30030。
Read Input Registers 3x (Modbus Function Code 4) Like the 4x holding registers, 3x input registers are used for reading analog values that are 16-bit register values. You can also use these registers to store floating-point data (page 57). Unlike the 4x registers, 3x registers are Read Only. Below is a sample command to read Modbus addresses 30021 to 30030 of node 1 on the Modbus network. Label Description Enable = 1 The module will send the command every time it goes through the command list. IntAddress = 1010 Places the data read from the Slave device into the module at address 1010. IntAddress 1010 of the module memory will be copied into the tag MCM.DATA.READDATA[10]. Count = 10 Reads 10 consecutive registers from the Slave device. Node = 1 Issues the Modbus command to node 1 on the network. Func = 4 Issues Modbus Function Code 4 to Read Input Registers. DevAddress =20 Function Code 4 DevAddress of 20 will read address 30021 Along with a count of 10, this command reads 30021 to 30030.
相關產品
