欧美久久片软件夜_手机看免费毛片的网站_LSP破解软件库合集链接地址_国产成a人大片在线观看_醉酒后少妇被疯狂内射视频_精品人妻99一区二区三区_日本少妇综合高清_国产醉酒肤白貌美在线观看_最近2024年中文字幕高清_秋霞影院亚洲wm

VMIVME-5576-000
計時器4寬32位，從位于BAR2地址偏移量0x18處的計時器4加載計數寄存器（TMRLCR4）獲取其加載計數。該寄存器中的位映射如下：寫入該字段時，定時器4在定時器時鐘的下一個上升沿加載寫入值，無論定時器是啟用還是禁用。存儲在該寄存器中的值也會在計時器的終端計數（或超時）時自動重新加載。計時器1和2當前計數寄存器（TMRCCR12）計時器1和2的當前計數可通過位于BAR2中地址偏移量0x20處的計時器1和2當前計數寄存器（TMRCCR12）讀取。該寄存器中的位映射如下：讀取任一字段時，當前計數值被鎖存并返回。根據WDT控制狀態寄存器（CSR2）中“讀取鎖存選擇”位的設置，有兩種模式可確定如何鎖存計數。有關這兩種模式的更多信息，請參閱CSR2寄存器說明。定時器3電流計數寄存器（TMRCCR3）定時器3的電流計數可通過位于BAR2地址偏移量0x24處的定時器3電流計數寄存器（TMRCCR3）讀取。該寄存器中的位映射如下：字段位讀取或?qū)懭胗?jì)時器4加載計數TMRLCR4[31..0]R/W字段位讀取或?qū)懭胗?jì)時器2計數TMRCCR12[31..16]R.O。計時器1計數TMRCCR12[15..0]R.O。

Timer 4 is 32-bits wide and obtains its load count from the Timer 4 Load Count Register (TMRLCR4), located at offset 0x18 from the address in BAR2. The mapping of bits in this register are as follows: When this field is written, Timer 4 is loaded with the written value on the next rising edge of the timer clock, regardless of whether the timer is enabled or disabled. The value stored in this register is also automatically reloaded on terminal count (or timeout) of the timer. Timer 1 & 2 Current Count Register (TMRCCR12) The current count of timers 1 & 2 may be read via the Timer 1 & 2 Current Count Register (TMRCCR12), located at offset 0x20 from the address in BAR2. The mapping of bits in this register are as follows: When either field is read, the current count value is latched and returned. There are two modes that determine how the count is latched depending on the setting of the “Read Latch Select” bit in the WDT Control Status Register (CSR2). See the CSR2 register description for more information on these two modes. Timer 3 Current Count Register (TMRCCR3) The current count of Timer 3 may be read via the Timer 3 Current Count Register (TMRCCR3), located at offset 0x24 from the address in BAR2. The mapping of bits in this register are as follows: Field Bits Read or Write Timer 4 Load Count TMRLCR4[31..0] R/W Field Bits Read or Write Timer 2 Count TMRCCR12[31..16] R.O. Timer 1 Count TMRCCR12[15..0] R.O.