產品展示
聯系我們
聯系人：麥女士
手機：+86 15270269218
電話：
Q Q：3136378118
郵箱：stodcdcs@gmail.com
地址：江西省九江市瑞昌市東益路23號賽湖農商城401號
MU-PSDX02
對于需要對加熱和/或冷卻進行雙位置控制的單區系統（例如，具有直接膨脹冷卻的燃?xì)馕蓓敊C(jī)組），建議采用雙位置負荷的時間比例控制。對于電加熱控制，尤其是底板電加熱，也建議采用時間比例控制。對于時間比例控制，必須小心避免控制設備的循環頻率超過設備制造商的建議。步進控制步進控制器按順序操作開關或繼電器，以啟用或禁用兩位設備（如電加熱器或往復式制冷壓縮機）的多個輸出或級。階躍控制使用模擬信號嘗試從設備獲得模擬輸出，該設備通常處于打開或關閉狀態。圖26和圖27顯示，各級可布置為在有或無運行（開/關）差速器重疊的情況下運行。在任何一種情況下，典型的兩個位置差仍然存在，但總輸出是成比例的。74關-開-關-開-關-開-關-開-關-開5 4 3 2 1差動節流范圍空間溫度（°F）72 0%負載100%
Time proportioning control of two-position loads is recommended for applications such as single-zone systems that require two-position control of heating and/or cooling (e.g., a gas-fired rooftop unit with direct-expansion cooling). Time proportioning control is also recommended for electric heat control, particularly for baseboard electric heat. With time proportioning control, care must be used to avoid cycling the controlled equipment more frequently than recommended by the equipment manufacturer. STEP CONTROL Step controllers operate switches or relays in sequence to enable or disable multiple outputs, or stages, of two-position devices such as electric heaters or reciprocating refrigeration compressors. Step control uses an analog signal to attempt to obtain an analog output from equipment that is typically either on or off. Figures 26 and 27 show that the stages may be arranged to operate with or without overlap of the operating (on/off) differentials. In either case, the typical two-position differentials still exist but the total output is proportioned. 74 OFF ON OFF ON OFF ON OFF ON OFF ON 5 4 3 2 1 DIFFERENTIAL THROTTLING RANGE SPACE TEMPERATURE (°F) 72 0% LOAD 100%
相關產品
