產品展示
聯系我們
聯系人：麥女士
手機：+86 15270269218
電話：
Q Q：3136378118
郵箱：stodcdcs@gmail.com
地址：江西省九江市瑞昌市東益路23號賽湖農商城401號
CC-PAIH01
本手冊中使用以下術語。圖1位于
此列表的末尾顯示了一個典型的控制回路
使用此列表中的術語標識的組件。
模擬：連續可變（例如，控制水的水龍頭
從關閉到全流量）。
自動控制系統：對變化作出反應的系統
或通過調整控制的變量不平衡
將系統恢復到所需狀態的其他變量
均衡
算法：生成控件的計算方法
通過操作錯誤信號或時間序列輸出
錯誤信號的數量。
補償控制：自動調整的過程
要補償?shù)慕o定控制器的設定值
第二個測量變量的變化（例如，室外
空氣溫度）。例如，熱甲板設定值
通常向上重置為室外空氣
溫度降低。也稱為“重置控制”。
控制代理：操縱變量所在的介質
存在。在蒸汽加熱系統中，控制劑為
蒸汽和操縱變量是
蒸汽。
控制點：受控變量的實際值
（設定值加或減偏移）。
The following terms are used in this manual. Figure 1 at the end of this list illustrates a typical control loop with the components identified using terms from this list. Analog: Continuously variable (e.g., a faucet controlling water from off to full flow). Automatic control system: A system that reacts to a change or imbalance in the variable it controls by adjusting other variables to restore the system to the desired balance. Algorithm: A calculation method that produces a control output by operating on an error signal or a time series of error signals. Compensation control: A process of automatically adjusting the setpoint of a given controller to compensate for changes in a second measured variable (e.g., outdoor air temperature). For example, the hot deck setpoint is normally reset upward as the outdoor air temperature decreases. Also called “reset control”. Control agent: The medium in which the manipulated variable exists. In a steam heating system, the control agent is the steam and the manipulated variable is the flow of the steam. Control point: The actual value of the controlled variable (setpoint plus or minus offset).
相關產品
