產品展示
聯系我們
聯系人：麥女士
手機：+86 15270269218
電話：
Q Q：3136378118
郵箱：stodcdcs@gmail.com
地址：江西省九江市瑞昌市東益路23號賽湖農商城401號
VT-5008-1X
此功能允許調整儀器內置光軸
單色儀（分光鏡）。
在校準調整之前，儀器的光學性能無法得到保證
函數已執行。未能執行此調整可能會導致變形
測量的波形。執行對齊調整后，波長
隨后也會自動執行校準。如果您正在使用儀器
一次或在移動過程中受到嚴重震動后使用時，執行
預熱后的對準調整程序結束。
波長校準<<操作程序見3.7節>>
可使用內部參考光源進行波長校準（當
內置光源規格為-L1）或外部光源。
分辨率校準<<操作程序見3.8節>>
通常，光譜分析儀的濾波器響應不是矩形的，并且
因此，分辨率帶寬與等效噪聲帶寬略有不同。這
當波長分辨率較高時（例如。，
0.05 nm或更小）。分辨率校準功能測量等效噪聲
每個分辨率設置的帶寬，并在內部將分辨率帶寬設置為
后果分辨率帶寬顯示在每個分辨率軟件的括號中
分辨率屏幕上的鍵。分辨率帶寬精度影響
寬帶光的噪聲測量和光功率測量結果
來源。具體而言，在以下分析和
執行計算功能。詳情請參見3-25頁和3-26頁。
This function allows adjustment of the optical axis of the instrument’s built-in monochromator (spectroscope). The instrument’s optical performance is not guaranteed until the alignment adjustment function has been executed. Failure to perform this adjustment can result in distortion of measured waveforms. After alignment adjustment has been executed, wavelength calibration is also subsequently performed automatically. If you are using the instrument for the first time or using it after it has been severely shaken while being moved, perform the alignment adjustment procedure after warm-up ends. Wavelength Calibration > Wavelength calibration can be performed using the internal reference light source (when the built-in light source specification is -L1) or an external light source. Resolution Calibration > Typically the filter response of an optical spectrum analyzer is not rectangular, and thus the resolution bandwidth differs slightly from the equivalent noise bandwidth. This difference becomes prominent especially when the wavelength resolution is high (e.g., 0.05 nm or less). The resolution calibration function measures the equivalent noise bandwidth at each resolution setting and internally sets the resolution bandwidth to the result. The resolution bandwidth appears in parentheses in each of the resolution soft keys on the resolution screen. The resolution bandwidth accuracy affects the results of noise measurements and the results of optical power measurements of wideband light sources. In detail, the resolution bandwidth is used when the following analysis and computation functions are executed. For details, see pages 3-25 and 3-26.
相關產品
